- Call Us: +91-9925047484
- Email: hpvalves@gmail.com
Knife Gate Valve
'HP' Style Knife Gate Valve has a large port which provides a low-pressure drop across the valve and is better suitable to handle slurries, powder & other Fluid/Solid mixtures then average to other type valves such as Butterfly or Ball Valve.
Knife Gate Valve is hopper isolation valves with their ability to cut through flowing powders and close by displaying any material in the seating area.
This Valve is named 'Knife' because of the bevelled bottom edge of the gate. It Allows closure of the gate even when a solid particle settles on the bottom of the body.
Knife Gate Valve Operation
- Manual Hand Wheel
- Double Acting Hydraulic Cylinder Operator
- Chain Wheel Operator
- Double Acting Spring Return Pneumatic
Cylinder Operator - Bevel Gear Operator
- Electric Motor Operator
Knife Gate Valve Automation
- Mechanical Limit Switches for Position Indication
- Proximity Limit Switches for Position Indication
- Solenoid Control Valve for Pneumatic Cylinders
- Pneumatic Positioner for valve positioning
- Electro Pneumatic positioner
- Air Filter Regulators
Knife Gate Valve General |
Size Range | 50MM TO 100MM | |
Moc | Cast iron/Cast Steel/CF8/CF8M/CF3M | |
Type | Uni-Directional/Bi-Directional | |
Port | Round/"V' Notch | |
End Connection | Flanged/Uni Lugged/Wafer/Double Lug |